Signature Wooden Head - Thermostatic Radiator Valve & Installation Kit - Chrome Angled 15mm
These valves have a 1/2" BSP radiator connection and so will fit all radiators and towel rails in the UK. The other connection to consider is that of your pipework, these valves have a 15mm pipework connection and so will fit pipework of the same size. We have these valves available in 8mm and 10mm for those with microbore pipework.
Installation
These pipe covers are made from solid brass. They can be cut down in height to suit your pipework. They are designed to slide over 15mm copper pipes and therefore, must be fitted before the valves and radiator.
This pack includes a bleed valve to bleed your radiator and a blanking plug, which goes on the opposite side to the bleed valve (at the top of the radiator or towel rail) to keep the unit completely sealed and functioning.
Fitting Type
Angled valves are probably the most commonly used valves in homes across the UK, they connect your radiator to your central heating pipework at a 90-degree angle. These angled valves are the ones for you if your set up is one of the below:
- Pipework comes out of the floorboard, and the radiator connection is on the side.
- Pipework comes out from the wall and bends up, and the radiator connection is on the side.
- Pipework comes out of the wall and the radiator has connections at the bottom, but the valve itself will protrude in front of the radiator, so where this is the case, we recommend corner radiator valves.
Thermostatic Radiator Valves, otherwise known as TRVs, provide multi temperature control of the radiators in your home – saving energy and money! These valves have wax sensor mechanisms inside that shut off the flow of hot water to the radiator when the room temperature reached the desired level (which you set using the grooves on the TRV head as a guide – the more grooves showing, the higher the room temperature). All of our Thermostatic radiator valves come with frost protection mode, which automatically opens the valve a little bit, even when fully switched off if the temperature of the room drops below a certain level – preventing your heating system, radiator and pipe from damage caused by frozen water.
MaterialThese valves are made from high quality brass, which means they are strong and durable and will look great on your radiator or towel rail for years to come!
ColourColour
Chrome is a great colour to create some shine, without the need for a bold bright colour. With a naturally reflective polished finish, these can be great for smaller rooms to give the illusion of extra space. Chrome also goes with pretty much every colour of radiator or towel rail so if you want to play it safe, play it chrome.
StyleIs your home a period property or does it simply ooze a vintage feel? Looking to purchase a traditional column radiator? Then these traditional wooden head valves are just what you’re looking for.
Original: $123.31
-65%$123.31
$43.16Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
These valves have a 1/2" BSP radiator connection and so will fit all radiators and towel rails in the UK. The other connection to consider is that of your pipework, these valves have a 15mm pipework connection and so will fit pipework of the same size. We have these valves available in 8mm and 10mm for those with microbore pipework.
Installation
These pipe covers are made from solid brass. They can be cut down in height to suit your pipework. They are designed to slide over 15mm copper pipes and therefore, must be fitted before the valves and radiator.
This pack includes a bleed valve to bleed your radiator and a blanking plug, which goes on the opposite side to the bleed valve (at the top of the radiator or towel rail) to keep the unit completely sealed and functioning.
Fitting Type
Angled valves are probably the most commonly used valves in homes across the UK, they connect your radiator to your central heating pipework at a 90-degree angle. These angled valves are the ones for you if your set up is one of the below:
- Pipework comes out of the floorboard, and the radiator connection is on the side.
- Pipework comes out from the wall and bends up, and the radiator connection is on the side.
- Pipework comes out of the wall and the radiator has connections at the bottom, but the valve itself will protrude in front of the radiator, so where this is the case, we recommend corner radiator valves.
Thermostatic Radiator Valves, otherwise known as TRVs, provide multi temperature control of the radiators in your home – saving energy and money! These valves have wax sensor mechanisms inside that shut off the flow of hot water to the radiator when the room temperature reached the desired level (which you set using the grooves on the TRV head as a guide – the more grooves showing, the higher the room temperature). All of our Thermostatic radiator valves come with frost protection mode, which automatically opens the valve a little bit, even when fully switched off if the temperature of the room drops below a certain level – preventing your heating system, radiator and pipe from damage caused by frozen water.
MaterialThese valves are made from high quality brass, which means they are strong and durable and will look great on your radiator or towel rail for years to come!
ColourColour
Chrome is a great colour to create some shine, without the need for a bold bright colour. With a naturally reflective polished finish, these can be great for smaller rooms to give the illusion of extra space. Chrome also goes with pretty much every colour of radiator or towel rail so if you want to play it safe, play it chrome.
StyleIs your home a period property or does it simply ooze a vintage feel? Looking to purchase a traditional column radiator? Then these traditional wooden head valves are just what you’re looking for.
